Denver Windshield replacement safety

Autos & TrucksRepairs

  • Author Freddie James
  • Published August 16, 2010
  • Word count 450

The majority of people overlook the fact that the front windshield is one of the essential aspects of their automobile safety structure. The windshield accounts for as much as 70% of the strength of your automobile, in a roll-over accident.

The front window also aids that your safety air bags release fully, in a vehicle accident.

When calling an auto glass company as them if they do a a full cut out of the windshield it is critical to not only way the window sit, within the pinch weld, for cosmetic reasons, but is vital for your own safety.

If you are in a serious accident and the windshield is ejected from the vehicle, there a chance you will be thrown from your vehicle too. Your best possibility of your survival during a collision is when you remain in the car. So use your seat-belts too

Once the windshield is extracted, during installation, a pinch weld primer is applied, to the metal area of the car. The primer prevents the pinch weld (the metal body) from rusting. This can minimize the opportunity for air leaks as well as make a long lasting bond so that the windshield will meet the manufacturers technical specs for safety.

Many auto glass installers use an aftermarket glass. There appears to be a disagreement among deciding on whether you should use replacement glass or original glass. Original glass is the glass which was installed in a vehicle at the manufacturer.

Aftermarket glass producers don't have the authorized legal rights to create the glass to OE standards. It generally is cheaper glass in which won't have the same thickness as the original equipment glass. If you are planning to trade vehicle in, or perform a lease return, make sure that you have original glass, or the automotive dealer could charge you a huge fee for installing original equipment glass.

Ask the tech exactly what a safe drive away time is for your motor vehicle. The windshield is held in place by urethane or adhesive. The urethane must entirely cure or solidify prior to driving down the street. If you're in an accident prior to the glue is wholly cured, you could be thrown through the windshield.

Ask your installer if they are using a quick cure adhesive or urethane. Many adhesives take 24-48 hours to cure in full. You don want to risk your safety if the urethane is in fact hardened in a time that you will need to drive your car.

Finally ask about their guarantee. If you have a leak or any difficulties with your new windshield you should call the windshield company and get a satisfactory conclusion to your difficulty without any hassle

The Denver Windshield Guy has been in the auto glass business for 15 years. He has seen amateur installers and hacks put the lives at unsuspecting auto glass customers at risk.

To find out some other dirty little secrets about the windshield and auto glass business go to http://www.denverwindshieldreplacement.com for a free video.

Article source: https://articlebiz.com
This article has been viewed 1,040 times.

Rate article

Article comments

There are no posted comments.

Related articles