What are PV solar panels?

What do we mean by PV solar panels? The word itself helps to explain how photovoltaic (PV) or solar electric technologies work. First used in about 1890, the word has two parts: photo, a stem derived from the Greek phos, which means light, and volt, a measurement unit named for Alessandro Volta (1745-1827), a pioneer in the study of electricity. So, photovoltaics could literally be translated as light-electricity. And that's just what photovoltaic materials and devices do; they convert light energy to electricity, as Edmond Becquerel and others discovered in the 18th Century.

When certain semiconducting materials, such as certain kinds of silicon, are exposed to sunlight, they release small amounts of electricity. This process is known as the photoelectric effect. The photoelectric effect refers to the emission, or ejection, of electrons from the surface of a metal in response to light. It is the basic physical process in which a solar electric or photovoltaic (PV) cell converts sunlight to electricity.

Sunlight is made up of photons, or particles of solar energy. Photons contain various amounts of energy, corresponding to the different wavelengths of the solar spectrum. When photons strike a PV cell, they may be reflected or absorbed, or they may pass right through. Only the absorbed photons generate electricity. When this happens, the energy of the photon is transferred to an electron in an atom of the PV cell (which is actually a semiconductor).

With its newfound energy, the electron escapes from its normal position in an atom of the semiconductor material and becomes part of the current in an electrical circuit. By leaving its position, the electron causes a hole to form. Special electrical properties of the PV cell—a built-in electric field—provide the voltage needed to drive the current through an external load (such as a light bulb).

A PV system is made up of different components. These include PV modules (groups of PV cells), which are commonly called PV panels; one or more batteries; a charge regulator or controller for a stand-alone system; an inverter for a utility-grid-connected system and when alternating current (ac) rather than direct current (dc) is required; wiring; and mounting hardware or a framework.

There are four main types of solar energy technologies:

1. Photovoltaic (PV) systems, which convert sunlight directly to electricity by means of PV cells made of semiconductor materials.

2. Concentrating solar power (CSP) systems, which concentrate the sun's energy using reflective devices such as troughs or mirror panels to produce heat that is then used to generate electricity.

3. Solar water heating systems, which contain a solar collector that faces the sun and either heats water directly or heats a "working fluid" that, in turn, is used to heat water.

4. Transpired solar collectors, or "solar walls," which use solar energy to preheat ventilation air for a building.

A PV system that is designed, installed, and maintained well will operate for more than 20 years. The basic PV module (interconnected, enclosed panel of PV cells) has no moving parts and can last more than 30 years. The best way to ensure and extend the life and effectiveness of your PV system is by having it installed and maintained properly.

Experience has shown that most problems occur because of poor or sloppy system installation. Failed connections, insufficient wire size, components not rated for dc application, and so on, are the main culprits. The next most common cause of problems is the failure of the electronic parts in the balance of systems (BOS): the controller, inverter, and protection components. Batteries fail quickly if they're used outside their operating specification. For most applications (uses), batteries should be fully recharged shortly after use. In many PV systems, batteries are discharged AND recharged slowly, perhaps over a period of days or weeks. Some batteries quickly fail under these conditions. Be sure the batteries specified for your system are appropriate for the application.

A 10% efficient PV system in most areas of the United States will generate about 180 kilowatt-hours per square meter. A PV system rated at 1 kilowatt will produce about 1800 kilowatt-hours a year. Most PV panels are warranted to last 20 years or more (perhaps as many as 30 years) and to degrade (lose efficiency) at a rate of less than 1% per year. Under these conditions, a PV system could generate close to 36,000 kilowatt-hours of electricity over 20 years and close to 54,000 kilowatt-hours over 30 years. This means that a PV system generates more than $10,000 worth of electricity over 30 years.

What does energy conversion efficiency mean?

Energy conversion efficiency is an expression of the amount of energy produced in proportion to the amount of energy consumed, or available to a device. The sun produces a lot of energy in a wide light spectrum, but we have so far learned to capture only small portions of that spectrum and convert them to electricity using photovoltaics. So, today's commercial PV systems are about 7% to 17% efficient, which might seem low. And many PV systems degrade a little bit (lose efficiency) each year upon prolonged exposure to sunlight. For comparison, a typical fossil fuel generator has an efficiency of about 28%.

We're working on ways to convert more of the energy in sunlight to usable energy and increase the efficiency of PV systems, however. Some experimental PV cells now convert nearly 40% of the energy in light to electricity. In solar thermal systems (like solar water-heating roof panels), efficiency goes down as the solar heat is converted to a transfer medium such as water. Also, some of the heat radiates away from the system before it can be used.