The Basics Of Portable Ultrasonic Flowmeters

HomeHome Improvement

  • Author Douglas M. Parks
  • Published October 7, 2010
  • Word count 421

When choosing a portable ultrasonic flowmeter you need to keep a couple things in mind. This article is going to take a look at some features that you need to have on your flow meter so that you can be sure you have what you need.

Best Features of Your Portable Ultrasonic Flowmeters

The first is that it can be easily set up and can be attached onto the outside of the pipe so and will not disrupt the flow inside the pipe. This gets the most accurate measurement and assures that the meter is not affecting anything. The installation should be minimally intrusive without a lot of work. The portable ultrasonic flowmeter should be able to measure the flow of almost any liquid or gas.

The flow meter should be able to measure pipe sizes from ten to seven thousand millimeters in diameter. It is also important to make sure that the flow meter can measure hazardous materials. In addition you want to make sure that you get one that is capable of being an gas flow meter as well as measuring liquid. A dual purpose unit will be very beneficial in the long run.

One of the most important parts of a portable ultrasonic flowmeter are the inputs. You need to have both analogue and digital inputs that are capable of multiple jobs for measuring temperature, relays and pressure. In addition these models should be able to log the data without any outside help.

A portable non contact portable ultrasonic flowmeter featuring a clamp on design will be able to measure the flow of material through clamp on transducers that attach to the outside of the pipe work. Something to be aware of is the fact that transit time flow meters, also known as "time of flight" meters are mainly used for measurement of clean liquids, although most should be able to tolerate less than five percent solids.

The principle behind the flow meter is acoustic waves with a frequency of 20 kilohertz emitted from one transducer to the other side of the pipe back to the opposite transducer require less time when traveling in the opposite direction. The differential transit time of the signals is proportional to the flow rate of the fluid.

As you can see there are many high level concepts for ultrasonic flowmeters, but understanding the basics of how they function can help you to choose the right one. Hopefully now you understand the basic concepts and are able to make the choice on your own.

If you love this article, you will also love another article written by this article's author on metal detector rental and Garrett metal detector.

Article source: https://articlebiz.com
This article has been viewed 687 times.

Rate article

Article comments

There are no posted comments.

Related articles