Building the Perfect Loft Conversion

HomeHome Improvement

  • Author Graeme Knights
  • Published March 2, 2011
  • Word count 477

For most people, converting a loft is a building job that is best left to the professionals - but there are some handymen who can pull off this job with the right amount of planning which will result in a good return on investment. This process can actually add a great deal of value to any property -- as much as fifteen percent according to some experts.

This is not an easy task and therefore the proper plans should be obtained from an architectural firm before initiating this process. It is important to know exactly what is involved before actually handing the project over to the architect. Items such as the number of rooms and what to use the space for are important. If a new bathroom will be a part of the space, does it include a shower and/or tub? These are all important considerations to be examined. Will the space be used for living only or combined for storage?

For many people, the area under consideration is the attic. This has to be checked for suitability and the easiest way is to make sure that the highest point is at least 7 ft. (2.3m). If this amount of room is available, a dormer can be easily incorporated as well; to maximize the amount of living space. Most firms will put this on the back part of the house in order to keep the front facade as was originally intended. Windows can increase the amount of light that is let into the space and increase ventilation as well.

Typically a loft is converted in order to have an additional bathroom or bedroom for the family. For the most part, the structure itself will be dependent on where the plumbing, electrical and stairs are located in the house. This will usually rule out the front of the property since there is a need for a vent stack in order to make sure that the water can flow and drain properly. There are also considerations that must be addressed for the hot water supply and type of heating involved. This could mean that the current system does not have the capability of producing the extra heat and/or hot water that is necessary for this space.

Any type of loft needs to be built according to the current regulations - this includes such things as building materials and home insulation materials, such as insulation board. Although the structural engineer in charge of the project and the architect should be up to speed with the current practices, it is a good practice to submit the plans to the local government authority to make sure they will pass code. They may provide the necessary changes that are necessary such as precautions for fire safety. This is an inevitable process as improving the fire resistance of ceilings and doors is crucial.

Graeme supplies his wizardry to One Agency, an Integrated Digital SEO Agency - writing on behalf of Celotex Home Insulation

Article source: https://articlebiz.com
This article has been viewed 617 times.

Rate article

Article comments

There are no posted comments.

Related articles