Swimming Pool Maintenance Tips To Live By

HomeHome Improvement

  • Author Mia Cusack
  • Published April 19, 2011
  • Word count 539

People owning swimming pools in Melbourne know the importance of good pool maintenance. Proper pool care will extend the lifespan of your pool systems, and save you money because your pool’s technical elements will run more efficiently. Knowing that your pool is in perfect working condition will give you peace of mind. It will also allow you to enjoy your swimming pool in Melbourne even more.

Picking out tree leaves and other debris is a good start to keeping in-ground swimming pools clean. Regrettably, that is not enough to keep your water body working effectively. You will have to expand your maintenance strategy, and add other cleaning techniques to your chore list.

  1. Pool chemicals

Ensure that you are using the right chlorine formula. If you do not have enough chlorine in your water, the bacteria and microorganisms in your swimming pool will have a party. If you have too much, you and your guest can get sick. An overabundance of chemicals can irritate your skin and eyes. It is also bad for people with pulmonary problems. High chemical levels will also corrode your pool’s pipes prematurely. When buying a supply of chlorine, follow the directions as indicated on the packaging. If you have doubts, ask your pool specialist.

  1. Filters

Pool filters have to be cleaned and replaced regularly. Check your pool’s manual for instructions. You should also regularly vacuum your swimming pool in Melbourne. Using a pole mounted brush, manually clean the corners, or the areas that are hard to reach with your vacuum. People lacking pool cleaning experience can hire a professional pool cleaning company. Observe what they are doing so you can take over after a while.

  1. Algae inhibitors

To keep in-ground swimming pools or any other pool types from turning green, add algae inhibitors. Ask your local pool chemical supplier for advice, as some algae will become chlorine resistant after a while. Prevent the growth of algae as it will not only discolour your water; it will also make your pool floor slippery.

  1. pH level

The pH level, acidity or alkalinity level of swimming pools in Melbourne has to be checked regularly. It should be part of your pool maintenance routine. Maintaining the right pH level will prevent the growth of bacteria and microorganisms.

  1. Surface skimmer

You can easily remove various types of debris from above ground and in-ground swimming pools. Removing tree leaves, branches and other particles floating in your pool water will prevent your filters from clogging up and will also lengthen the effectiveness of your chemicals. Pool cleaning tools are designed especially for pools; their handles are much longer, and the materials are chlorine resistant. Surface skimmers can also remove particles created by certain chemicals in your pool water.

  1. Vacuuming

Vacuum attachments like brushes can scrub the crud from the bottom of swimming pools in Melbourne. Removing the dirt from your pool is necessary to prevent pool users from getting sick. Dirty or slippery pool floors can also cause accidents. While you may be a good swimmer, some of your guest may not be. Small children can actually drown. For that reason, schedule regular maintenance. Once you have a routine going, you will have your pool cleaned in no time.

Looking for a quality built swimming pool Melbourne? Build your dream pool with Seaspray swimming pools Melbourne. View our gallery of pools today!

Article source: https://articlebiz.com
This article has been viewed 1,051 times.

Rate article

Article comments

There are no posted comments.

Related articles