Pavers are usually the first choice for outdoor surface landscaping. However, pavers can get very dirty over the years, especially if they are not cleaned on a regular basis. Generally, pavers are made of pre cast concrete, brick or granite which has a strong tendency to attract dirt and grime. Therefore, cleaning pavers is a very important step in maintaining the hygiene as well as beauty of your home and its surroundings.

The best way to clean pavers is by using a pressure cleaner. Pressure cleaning pavers involves using water which is sprayed at a very high pressure. The water hits the surface at a very high pressure dislocating the dirt and thoroughly cleans the surface of the pavers. The pressure level of pressure cleaners can be adjusted according to the level of dirt on the pavers.

Cleaning pavers with the help of a pressure cleaner is an easy task as dirt and stains can be easily removed with this device. Stains can get formed on the pavers on the driveway due to spills and leaks from oil, tar, etc. All these stubborn stains can be easily removed by pressure cleaning. You can also use stain removal chemicals and solvents during pressure cleaning.

Like all mechanical devices, a pressure cleaner too comes along with its own list of do's and don'ts. There are a few things to keep in mind when you decide to get your pavers cleaned by a pressure cleaner:

• Water is stored in the water pump in a pressure cleaner. Always ensure that the water is up to the sufficient level in the water pump. If the water falls below this mark, it could cause serious harm to the pressure cleaner.

• Always keep a safe distance from the area of the surface being pressure cleaned. The pressure of the water at the nozzle is very powerful. It is powerful enough to separate flesh from bone. Therefore, ensure that there is nobody, especially children and pets, roaming about near the place that is being pressure cleaned.

• Sometimes, cleaning pavers with only water with a pressure cleaner may not be enough. You may need to use detergents or other solvents to get rid of stains. However, read the instruction manual carefully before you use anything other than water in the water pump of the device. Most pressure cleaning usually involves detergents mixed with water.

• Always make sure that you are applying the correct level of pressure. The pressure level can be adjusted on the nozzle of the device.

• Before actually using a pressure cleaner, sweep the area to be cleaned with a broom. This will take care of large debris and loose dust that could otherwise create problems if the pressure cleaner is used directly.

• Make sure that the surface to be cleaned is hard enough to endure the high pressure.

Thus, pressure cleaning is the best away for cleaning pavers as long as you follow the guidelines and safety tips.