Important Information on Chimney Inspections!
- Author C. Michael Hunter
- Published November 16, 2011
- Word count 729
It is essential to keep fireplaces and chimney flues in good working condition to prevent any problems with the interior ventilation system. The primary function of a chimney or flue is to serve as a passageway for the by-products from a household heating system as these by-products are extremely hazardous to the occupant’s health because of the poisonous gases produced. One of the hazardous substances is carbon monoxide, which can cause several respiratory problems. To be protected against such noxious substances, regular inspections and proper maintenance must be performed on any ventilation system to ensure its integrity and functionality.
Importance of Chimney Inspections
Inspections must be done regularly to be able to assess the structural integrity of a ventilation system, maintain liners, remove obstructions, get rid of creosote deposits, promote airflow, and check for draft control. The flue should be cleaned regularly to prevent any future damage and to ensure that it conforms to the recommended building codes and other safety standards regulating the proper design and installation of these systems. Over time, soot and creosote build up, hampering the normal flow of hazardous gases to the outside. If this happens, any by-products of the heating system such as carbon monoxide will be trapped inside the house and put household members in serious danger.
Additionally, creosote and soot are highly flammable substances, especially when exposed to extreme heat. They should be completely cleaned from the chimney or flue to avoid the creation of a fire hazard. Regardless of the type of chimneys in the home, it is important that a periodic check-up be performed before using the fireplace to avoid significant damage including the loss of life and property.
Levels of Inspection
The National Fire Protection Association (NFPA) has established three (3) different levels of inspection.
-
Level One – This is the most common type of inspection. During this process, readily accessible portions of the chimney structure and flues are examined. No significant tools are used to gain access. Flues are checked for obstructions and the nature and volume of combustible deposits are identified.
-
Level Two – According to the NFPA, any alteration of fuel types; the flue lining; or any addition or replacement of appliances using fuel calls for a level two inspection. At this level, the inspector needs to gain access to various parts of the chimney structure through the roof, basement, attic or crawlspaces. Common hand tools and ladders, as well as some specialized tools such as video scanners are utilized to access and visualize difficult areas.
-
Level Three – This type of inspection is necessary for non-accessible areas of the structure if potential hazards are suspected. Non-accessible areas are locations that are difficult to reach without damaging or removing some portions of the chimney and is done to reveal those concealed places. This inspection level should be thoroughly discussed with the owner before it is done.
Safety Alerts
The United States Consumer Product Safety Commission (CPSC) has published safety alerts for homeowners with fireplaces. It has been reported that the primary cause of fires involve the use of chimneys and then the fire spreads to other parts of the house. These safety alerts are intended for those who have wood-burning stoves, fire inserts, and other types of chimneys. Safety alerts are designed to warn users about potential fire hazards related to these structures.
Additionally, the CPSC has identified the following causes of fireplace problems:
-
Inadequate fireplace installation.
-
Improperly installed thermal insulation.
-
Improperly installed flues.
-
Distorted structural integrity caused by creosote deposits.
The CPSC also recommends the following:
-
Install chimneys and flues based on the manufacturer’s standards and local codes.
-
Use adequate stove size to minimize creosote and soot formation.
-
Have professional inspections and/or chimney sweeping performed regularly.
-
Operate installed appliances within the temperature limits set by the manufacturer.
-
Perform frequent check-ups for signs of concealed structural damage.
Maintaining a functional chimney system is essential to avoid any future problems. It is imperative to learn and understand the above information about regular chimney and flue inspections to: maintain structural integrity; ensure that a properly functioning system; and prevent the formation of creosote that can cause an eventual fire hazard. By understanding the importance of these inspections and the various levels as well as being aware of any safety alerts issued by the CPSC, future problems and be avoided that could be caused by a chimney heating system!
C. Michael Hunter is an expert in residential and commercial roofing. To find out more about Houston Roofing Contractors, go to the main website at: http://www.schulteroofing.com.
Article source: https://articlebiz.comRate article
Article comments
There are no posted comments.
Related articles
- Vintage Bohemian Charm: Creating a Home Office Retreat
- Embrace the Maximalist Decor : Unleash Your Boldest Dreams
- Fall rustic farmhouse décor with vintage doors and earthy woods
- The Premier Lighting Stores in Brampton, Caledon, and Mississauga: Illuminate Your Space with Style and Precision
- A Brighter, Cleaner Workspace: The Importance of Commercial Cleaning in Auckland
- Antique Doors in a Spanish Modern Home
- Rustic Modern Mountain Cabins Decor
- Why Insulate Your Crawl Space?
- How to Choose the Best Home Renovation Contractor
- All Seasons Cleaning Services: A Top Choice for Tree Removal
- Is Professional Roof Cleaning Worth It? Absolutely.
- Transform Your Property with All Seasons Cleaning Services: A Guide to Our Exterior Painting Process
- A Closer Look at Our 5-Step Exterior Window Cleaning Process - All Seasons Cleaning Services
- The Pros and Cons of Exterior Window Cleaning: Is It Worth the Effort?
- Why Pressure Washing is Essential to Avoid Slippery Sidewalks
- What time of year should you clean your roof?
- How to create Interiors with a Soul
- Antique Doors, Vintage doors with Old Souls
- Bedroom Barn Doors
- Curate Vintage Rustic Charm for your Patio
- How Tri-State Ready Restoration Prepares for the Upcoming Hurricane Season
- 5 Tips for Keeping Your House Warmer in Winter
- Transform Your Kitchen: The Elegance of Premium Cookware and Appliances
- The Benefits Of Installing Solar Panels On Your Home
- Buying a Dream Home in Oakville | Preserve Oakville
- Useful Tips to Harness The Solar Power to Make It Worth in The Virgin Islands
- Embrace Moody Maximalism: Unleashing Rich, Bold Interiors
- Enhance Your Bedroom with Sliding Barn Doors
- A Master’s Hands Launches a New Website to Benefit Customers
- Essex Air Conditioning: Enhancing Comfort and Efficiency Across Essex County