How to Light a Fire in Your Wood-burning Stove

HomeHome Improvement

  • Author John Dempsey
  • Published January 21, 2012
  • Word count 457

Wood-burning stoves are becoming increasingly popular as a way of heating the home in a cost-effective and environmentally sustainable manner. However, if you have never used a wood-burning stove before, you might be wondering how to get your fire started and ensures it stays burning.

The first step you need to take to get your wood-burning stove fire lit is to prepare the right fuel. Suppliers of firewood Kent, or in your local area, will be able to deliver quality logs and kindling to your home. Look out for wood which is seasoned and preferably kiln-dried, as this will offer best value for money in terms of heat-output and burning time. Ideally, your firewood should be stored in a dry place, such as in a log-box or shed, as damp wood is harder to burn. Along with ordering your firewood, you can also buy some fire-lighters, and get a few sheets of unwanted newspaper ready.

Of course, there are lots of different ways to light a fire in a wood-burning stove, and with time you will find the method which works best for you. At first though, you will find it easiest to follow these tips which will result in a nicely glowing fire, and keep your home warm all day.

 Always start by checking that the grate and ash-box are clear of ash, as this can suffocate your fire. Some people like to leave a small amount of ash in the base of the wood-burning stove grate to form a base for the fire.

 Make a pile of tightly rolled newspaper balls in the centre of the stove firebox, and if you wish, add a few fire-lighters.

 On top of these, pile kindling (twigs or short strips of good, seasoned wood). Try to form a "teepee" shape, as this allows the air to circulate and helps to get the fire ignited.

 Using matches or a lighter, carefully ignite the newspapers from the bottom of the pile that you've made. These will catch alight very quickly, especially if you have used fire-lighters.

 When as you notice that the kindling has caught on fire and is burning brightly, you can add a few larger pieces of firewood to the wood-burning stove. At this stage it is important not to overfill your stove as this may put your fire out. Remember, be patient here – if you put too much wood on the fire it will not burn properly.

 If your model of wood-burning stove features air vents, you should gradually open those at the top and at the bottom as your fire starts to burn. After a few practice runs, you'll soon learn the quirks of your particular wood-burner and know exactly when to open and close the vents.

Eager to light your wood-burning stove, but don't know where to buy firewood, Kent(http://bit.ly/firewood_kent)? http://www.firewooddeliveredkent.co.uk will deliver kiln-dried firewood to your home, so you can stay cosy and warm this winter. - John Dempsey | Tech/Lifestyle Blogger | surfguru81@gmail.com

Article source: https://articlebiz.com
This article has been viewed 664 times.

Rate article

Article comments

There are no posted comments.

Related articles