Caring For Your Action Camera
Computers & Technology → Technology
- Author Matt Taylor
- Published February 29, 2012
- Word count 684
Modern HD action cameras are designed to withstand some of the most extreme environments on earth, from dirt and dust to snow and water. However, despite their capabilities action cameras are not invincible and will require a degree of manual care and consideration in order to maximise their lifespan.
The vast majority of camera care comes down to simple common sense, from things as basic as ‘don’t take it under water without a case on’ to ‘keep it clean’. Much of the following advice may sound obvious, but it should not be overlooked.
Protect your camera from the elements
An action camera’s job is to capture footage in situations that a standard video camera would not cope with. Be it tearing though the Sahara at 100mph, snowboarding in a blizzard or cycling through three feet of mud, there will be an action camera up to the job. However, such hostile environments bring with them a number of harmful elements.
Water - too much exposure to water can be extremely harmful to certain cameras, but apply the appropriate casing and water and video can become a match made in heaven. From watersports themselves, to cycling in heavy rain, it’s essential to apply a waterproof case to your camera. GoPro HD users may wish to use the GoPro HD Waterproof Housing and Drift owners could use the Drift Waterproof Case. So if you are planning on getting wet, be sure to invest in a suitable means of water protection for your action camera.
Shock - action by name and action by nature, action cameras would not be action cameras if they weren’t subject to a degree of physical strain. While a camera mounted in the relative safety of a car will not require protection, an action camera mounted on the handlebars of a MotoX bike will be subject to regular batterings. To protect an action camera from severe impact, invest in purpose built protective casing designed to take the punishment of off-road racing. GoPro users should look no further than the GoPro Race Case.
Dirt and dust - many extreme sports, such as mountain biking will carry a degree of exposure to dirt or dust which can cause damage to a camera’s lens. If partaking in a particularly dirty sport, apply the same principles as above by using a protective case where necessary.
Keep it clean
When you have finished using your action camera take time to clean it, paying particular attention to the casing and the lens. First, carefully remove any shards of rock or sand that could scratch the lens. Then using a damp lens cloth remove any other dirt from the area. To clean the casing, carefully work a damp cloth across the body until all grime is removed.
Even if your camera isn’t caked in mud, it still pays to wash it with clean water as salt water or dust sitting on the camera can cause damage over time. Also be sure to regularly clean any casing or holdalls that could contain dirt, dust or rocks.
Use a suitable mount
Be sure to use a mount that has been designed for the task at hand. For example, if going surfing, be sure to invest in a specific surf mount that will keep your camera fixed securely to your board. If you don’t then you may find your camera at the bottom of the ocean. Likewise, if attaching a camera to the bars of a Superbike, use a mount that will withstand wind impact at high speeds.
Also, be sure to invest in mounts that are designed for your brand of action camera. For example, if using GoPro HD, use purpose built GoPro mounts rather than that of another brand.
Modern action cameras, such as the GoPro HD, Drift HD or Bullet HD are all designed to withstand the strains associated with action sports, but it doesn’t hurt to apply an extra level of protection. Take good care of your action camera and you could still be using it in many, many years to come.
Submitted by Matt Taylor, Marketing Manager at Action Cameras. For more information about the GoPro HD2, Drift HD and Bullet HD action cameras and the accessories and mounts available for them, visit http://www.actioncameras.co.uk/.
Article source: https://articlebiz.comRate article
Article comments
There are no posted comments.
Related articles
- The Ultimate Guide to 3D Animation: From Basics to Advanced Techniques
- Mitsubishi Electric proves heat pump compatibility with microbore pipework
- Why Small to Large Companies Continue to Use Dated/Dinosaur Technology
- 10 Ways Business Central’s Quality Inspector App Streamlines Quality Assurance
- 10 Ways Business Central’s Quality Inspector App Streamlines Quality Assurance
- The Rise of Sustainable Technology: Shaping a Greener Future
- Why Bullseye Engagement Offers the Best OKR Software for Businesses
- Web Development Companies in Canada
- How EasyPDF™ Forms Save Time & Money at Home and in the Workplace
- The One and Only 15-Second Digital Lien Waiver to Complete and Submit in Record Time Using the Free Adobe Reader
- The Impact of Employer Branding on Leadership Recruitment
- Augmented Reality (AR) in Business: Why Your Company Needs It
- Top 10 Reasons to Use Business Central’s License Plating App
- The Hidden Advantages of European Offshore Development Companies
- App Development: Transforming Ideas into Reality
- Automate you Chauffeur Service with A to Z Dispatch
- The Impact of Machine Learning and AI on Business: What the Future Holds In the modern busine
- Generate Flashcards Fast with AI: The Ultimate Solution for Developers
- Blockchain Interview Guide: Essential Questions and Answers for Success
- Eight Free Business Central Apps That You’ll Wish You Had
- How Artificial Intelligence (AI) and Machine Learning (ML) Are Transforming Computer-Based Trading Platforms
- The Role of Gas Engineers in Modern Energy Systems: Linking to Sustainability and Innovation
- The Significance of Stars in the Universe and Their Impact on Human Culture Throughout Evolution
- Exploiting Artificial Intelligence for Urban Mobility Transformation: A Case Study of Guatemala City
- Top 10 Ways Business Central Users Streamline Shipping
- The Impact of AI on Job Security and Availability in Africa: A Future at a Crossroads
- CNC Machining Vs 3D Printing: Which Technology Is Right For Your Project?
- The Future of Search: Embracing AI-Powered Search Solutions
- Low-Fidelity Vs High-Fidelity Prototypes: When To Use Each In Product Design
- MARKET SEGMENTATION