You might just be at that point, where the small, wired home network you created a few months ago just is not doing it for you anymore and you want to extend it with a wireless network. Of course, you might as well be at that point, where you want to build a completely new network. Whichever the reason may be, the problem is the same – you need to know exactly how to do a wireless network installation.

Most of the time, you will find it necessary to install a wireless router. Now, you will only need to install one of these if you either are building your first home network or simply want to keep the wireless network installation at the simplest level as possible. Remember to install the router in a somewhat central location in your home so this way all receivers will be almost in the same line of sight. You see, with wireless internet, the speed depends on the distance from the router to the receiver. All you have to do now is connect your router to a power source, and of course an Internet source. Nowadays many routers support broadband modems and even dial-up connections. Still, when you buy a router make sure that it has an RS-232 serial port if you need the dial-up connection, because otherwise you will find yourself having a useless router. Last, but not least, you can also connect a wired router (called a switch or a hub) because wireless routers generally do contain built-in access points.

Now choose the name of your network. Often with Wi-Fi the network names are generically called SSID. Of course, this SSID has to be identical with all computers that are sharing the same wireless router. For your own protection, it is recommended that no matter what name your router manufacturer set to change it to something else. In order to find a network name for your router all you have to do is consult the product documentation. Finally, read the documentation to find out how to handle WEP security and also how to turn on firewall features and how to set other options.

Wireless Access Points

One wireless type network connection is supported by only one access point. It is very important to remember this further on. It is recommended to use this type of access point only if you indeed need the features that only a wireless router can provide and also you want to have more than three or four computers around the house that will be connected to the internet. You can read more at http://www.howtosetupwirelessnetwork.com

The positioning rule is the same as with wireless routers – access points have to be placed in a central location so that all receivers will be in the same line of sight. Plug in the power cord and if necessary the dial-up internet connection as well. Now cable the access points to your hub or switch. In this case, you will not have to configure any firewalls at all, yet you will still have to set a network name and enable the WEP function.

Giving these two options of installing a wireless network in your house, from this point on, all you have to do is install them in your own operating system and you're good to go.