How To Build A Waterfall

HomeGardening

  • Author Elizabeth Morgan
  • Published November 14, 2006
  • Word count 474

With a fair amount of hard work and patience, you can easily build your own waterfall in your garden. However, before embarking on the task, there are some things to consider. Check whether your landscape has an elevation. If not, it means more labor. Building a waterfall pond will require digging. Check with utility companies to see if you’ll be damaging any of their underground cables in the process.

While building the waterfall, the important aspects to be considered are the base pool, the height to which water is to be lifted and the feature on which it is to be cascaded. Begin digging the ground at the desired spot. This would require care and labor. Pack the bottom of the pond with stones and sand. This will give it an ocean bed effect, as well as prevent water from percolating inside the ground.

Now you can begin setting up the cascade. It is better to play with materials that are freely available in the garden, such as rocks. Select rocks that are large enough and at the same time fit well into each other. Place the rocks in such a way that the heavier rocks are at the bottom and the smaller ones are at the top. The basal rocks must jut into the pond, otherwise the fall won’t happen. Do not pile the rocks too high. Judge the height of the waterfall by the amount of water in the pond. Concrete rocks are also available in the market. These wedge nicely into each other, but they increase the cost of the waterfall.

Once this is done, the difficult task of setting up the pump begins. You will need a submersible pump. Place this pump inside the water. Attach the pipe to it and bring the pipe to the top of the rocks. The pipe should be hidden into the rocks. Adjust the rocks a little if need be. Even at the topmost point the pipe should be hidden among rocks. When the water falls, it should appear as if it is falling through the rocks and not through artificial pipes.

Many aesthetic things can be done with the waterfall. Some rocks can be placed in steps one above the other. If these rocks are flat enough, the water will strike them and bounce down, leading to another waterfall in itself. Fishes and plants can be placed in the pond. Artificial birds or mermaids can be erected around the pond. You can even keep a birdfeeder so that birds would chirp around the waterfall all the time, giving it a more natural effect.

The sound of water striking water in the garden is soothing. However, do not keep the waterfall running when you are absent. It will lower the level of water in the pond and the pump may burn out.

Indoor Waterfalls provides detailed information on waterfalls, indoor waterfalls, waterfall gardens, waterfall ponds and more. Indoor Waterfalls is affiliated with Outdoor Stone Fireplace.

Article source: https://articlebiz.com
This article has been viewed 1,052 times.

Rate article

Article comments

There are no posted comments.