Tips For Installing A Wireless Security System

HomeHome Improvement

  • Author Victor Epand
  • Published March 7, 2009
  • Word count 576

If you are one of those brave and handy individuals that has decided to install a wireless security system, then it may become a daunting task at times. You may be wondering where the best place is to place your equipment, or how the window and door sensors function.

While it is easier to install a wireless security system than a hard wired system, there are several different factors to consider, so here is a short guide to assist those, who may have unanswered questions. The first thing you will want to do is make a fairly detailed plan as to where you will be putting everything. In terms of the control panel, for example, you will want to place it in an easily accessible, and well trafficked area in your home.

However, avoid placing the control panel somewhere in plain view of a window, since potential burglars can use that against you if they get inside your home. A control panel that is not directly visible by visitors and can be accessed by everyone in your home is the best you can do. Next, when planning where to put equipment, keep in mind that while the system is wireless, you will need to plug in your control panel in order to make it work, so place the unit next to an outlet.

In addition, while planning, you may consider the placement of sensors and motion detectors. Place the door and window sensors in particularly vulnerable areas. You will not have enough sensors for all of the doors and windows in your home, so be considerate about where you place them. Specifically, you will want to place window sensors on your children's windows or on windows that are not directly visible by your front door neighbors. Door sensors will especially be needed on your front and back door.

Once you have a detailed plan about where you will be putting things, the next stage is to put install that equipment. While most of the equipment installation will depend upon the brand and type of equipment you have, there are some standards that you can follow. For example, when installing the control panel, it may be wiser to install the power cord inside of the wall, as opposed to externally plugging the cord into an outlet, where it can be easily disconnected by a burglar. Also, you will need to program the control panel and sirens, using some code. These are both usually programmed using the instructions included with the equipment, and a small screwdriver to access the necessary panel.

Once you begin installation of your door or window sensors, you are nearly done with the set up. Sensors will always include a magnet and a transmitter which enables the opening of a door or window. You will want to place the transmitter on the non moving, sturdy surface, such as the window frame or door frame. Next, you will place the magnet on the moving part. This would be the window or the door that you would like to keep an eye on.

Once the control panel, sensors and motion detectors are all in place, you should review the system to see if there are any malfunctions. It is possible that the system can receive interference if your home is in a particularly busy area for radio waves or other transmission waves. If that is the case, you may need to install a wired security system.

Victor Epand is an expert consultant for home goods, home supplies, home automation and security. Follow these links to find the best http://www.shopdepartmentstore.info, http://www.countryhomestore.info, and http://www.4homeautomation.info.

Article source: https://articlebiz.com
This article has been viewed 943 times.

Rate article

Article comments

There are no posted comments.

Related articles