How To Quick-Fix Your Engine: Common Boat Engine Problems

Sports & RecreationsHobbies

  • Author Victor Epand
  • Published April 17, 2009
  • Word count 500

There are so many things that can go wrong with a boat when it is out on the lake. Boats are like cars and trucks in that they need to have maintenance done on them as often as possible especially if you take your boat out a lot. What are the common issues that plaque boat engines and the owners.

Overheating - It is not uncommon for a boat's engine to overheat. With all kinds of items being thrown into the world's lakes, streams, rivers and oceans, it's almost inevitable that something will get sucked into the water intake. Be sure you check this area first. Should there be something stuck inside, remove the item and wait for the engine to cool off. After a bit of time has passed, try to restart the engine. Sometimes, trash isn't the problem though.

Another culprit to an engine overheating is the water pump impeller has blown. It's best to have this spare part on board. However, most persons will not so what do you do to fix the problem and get back to shore? Use the drain plug located in the engine's water jacket. Using a funnel, pour fresh water into it. While it won't completely fix your problem, it does help in that you can slowly make your way back to the shoreline. However, you have to keep watch on your temperature gauge. If it seems like it is starting to get hot, stop and let it cool down. Depending on how far out you are will depend on how quick you get back to the shore.

Oil Gasket - If your boat won't start, check your oil gasket. If it's leaking, that can be a culprit. All you have to do is replace it with another gasket. However, most people do not have spare gaskets lying in their toolkit. That means you need to come up with a way to make a temporary one. This is when you can use a marine chart. Cut out a temporary gasket from the chart, adding layers to it. In your haste, you may accidentally cut out the information you need. Be sure you watch where you cut.

Spark Plug Wire - Spark plug wires that have cracked can short out especially if the day is rainy or it is rather humid. When this occurs, your boat engine is likely to misfire. Be sure you keep duct tape in your toolkit to close up the wires and keep wetness out. Be sure you cover every crack you find so it doesn't short out. This will work until you can replace the spark plug wires.

Being prepared is essential to fixing your engine quickly. Carry spare parts with you that may be necessary to repairing your engine. Be sure you have tools in your boat to help you out. Most importantly, be sure you have the necessary information that will help you to fix your boat. If you need to, keep a booklet on hand.

Victor Epand is an expert consultant about model boats, boat parts, and model submarines. You will find the best shopping at these sites for http://www.sellmodelboats.com, http://www.sellusedboatparts.com, and http://www.sellmodelsubmarines.com.

Article source: https://articlebiz.com
This article has been viewed 1,155 times.

Rate article

Article comments

There are no posted comments.

Related articles