Creating a Rustic Atmosphere With Wood Decor

HomeDecorations

  • Author Jeremy Smith
  • Published June 23, 2011
  • Word count 431

When a person wants to create a rustic atmosphere in a home, a cabin, or some other kind of building, he or she will need to have many different things. A person can use wooden tables and bed frames, for instance, which can be made either of raw boards or finished logs. They can use wood-burning stoves and other pieces of hardware that hearken back to an older age. One of the things that many people forget about, however, is the importance of the small finishing touches. These can be the difference between an authentic rustic decorative theme and a theme that looks like it has been forced or contrived.

One of the things that a person will need to put these finishing touches all together is a number of wood switch plates. These will make it so that the light switches and other plates -- which relate directly to a very modern bit of technology -- will not break up the theme. Plastic switch plates can ruin a wall that is made entirely out of wood; in some cases they will work, but in many other cases they will break up the theme and make it look like a strange mix of rustic equipment and modern technology. Simply adding wood switch covers can take care of this entire problem.

There are wood switch plates for many different uses, so the homeowner should not worry that they will only be able to go around standard lights. These can also be found for multi-switch lights, supporting up to five in a row, or even blank covers to mask the areas in the home that have more wires for future use. A large set of these can be purchased so that they will all match no matter where they are installed, making sure that one part of the building does not stand out more than any other part.

These can also be attached with screws in just the same way that the plastic variety can be put in a home. No additional hardware is needed. Some people like to glue them in place as well, using high-quality wood glue, to make sure that they are strong and will not shift or break. This can be helpful in some ways, but it can also lead to problems when people are trying to replace them as they will be much harder to remove from the wall. Using the screws will still look good since they blend in very well. The entire cabin or home will match and look just as it was intended to look.

If you are interested in wall plates or rocker switch plate, be sure to visit Switch Plate Super Store.

Article source: https://articlebiz.com
This article has been viewed 910 times.

Rate article

Article comments

There are no posted comments.

Related articles